NingBo BeiLun Meank Magnetics Co., Ltd
NingBo BeiLun Meank Magnetics Co., Ltd
Contact us
  • +8657486220016
  • 1Floor, No.128 Building-1 128#, Jijin Road, XiaoGang Street, Beilun district, Ningbo City, China

What Should We Pay Attention To In The Daily Maintenance Of Magnetic Frame

Magnetic frame is very practical equipment for removing industrial impurities. It is mainly used to remove iron impurities in the hopper, feed trough and floor space. It can effectively remove free-flowing powder and iron impurities in small particles. Because of the specialty of its equipment, what should we pay attention to in the daily maintenance of the magnetic frame?

First of all, the magnetic frame is magnetic because the components are assembled in a certain order, so when assembling the magnetic system, we must first divide the magnetic poles of the magnetic blocks, to avoid errors in assembling. And in the assembly process, it is forbidden to use a hammer and other tools to knock directly on the magnetic block, to avoid damage to the magnetic block. If the magnetic pole is not right, manual adjustment is the best.

Secondly, the dismantled magnetic blocks and small parts should be carefully cleaned in different categories, pay attention to whether there are any taboos in the cleaning process, and do not use improper cleaning methods to clean the parts. After cleaning, it should be appraised by professional inspectors, and the parts can be assembled before being used. Then when replacing new parts, we must make sure that the size of new and old parts is the same, the model is correct, we must check carefully, not carelessly.

Finally, the daily overhaul of the magnetic frame is a more professional operation, which must be careful and cautious. The materials used in the process of overhaul, whether loading and unloading tools, replacement parts, even detergents, must meet the design requirements of the magnetic frame, do not hold the same attitude, avoid mistakes in the operation process. In this process, it is required that the whole process should be operated by professionals, to avoid the negative impact of the improper operation on the magnetic frame, leading to its inability to function or poor effect.
Related Articles